All Products
Showing 40–72 of 72 results
-
Sale!
-
Sale!
-
Sale!
-
Sale!
-
Sale!
-
Sale!
-
Sale!
EFI & Electronics2 PIN DEUTSCH CONNECTOR KIT
Each kit is supplied with one male housing, one female housing and the required amount of terminals.
(0 reviews)$14.99$14.50 Add to cart -
Sale!
EFI & ElectronicsTrue Motorsports 6RSTAGER Control box
FEATURES AND TECHNICAL SPEC’S:
-
Designed specifically to enable the Transbrake on 2011-2017 6R80 Transmission. (Replaces and eliminates the need for a dual relay configuration and uses the same wires to interface to the transmission). This device will work on 4R200 setups too!
-
Safe Transbrake enable feature in which the Transbrake can only be engaged when the foot brake is depressed. (This prevents damage by accidentally hitting the Transbrake button)
-
Uses a modified version of the Smooth Stage’s proprietary modulation scheme designed specifically for the 6R80 for slowly rolling into the Staging beams
-
12 Force/12 Speed settings to allow for easy adjustability to dial in the desired approach speed while Staging
-
Incorporates the DeeSpeed 2.0 system architecture to prevent the stuck pedal condition for 15-17 model years. (When installed correctly this brake pedal interface should prevent the Torque Source 14 error. It will also turn the brake lights ON while the Transbrake button is engaged)
-
LED indication of Power, TransBrake and Stage enable
(0 reviews)$360.00$359.00 Add to cart -
-
Sale!
EFI & ElectronicsTrue Motorsports Smooth Stage Plus Staging Box
Smooth Stage Plus™ allows cars/trucks to enjoy silky smooth transitions from PreStage to Stage Beams.
Staging at the drag-strip has always been a little tricky when dealing with ultra high HP cars/trucks. This matter is even more complicated for those that have large/laggy turbocharged vehicles or tight stall converters. Our customers needed a way to get up into boost in the pre-stage beams, then smoothly/consistently roll into the staged beams…so thus the Smooth Stage™ was created.
Being able to smoothly “slide” into the beams cuts down on the “drama”. No more rocking,bucking,bumping, flickering beams, or red-light starts. Simple adjustments can be made with a single knob for different tracks, power levels, or launch rpms. Even though this box is simple to use, it’s jam packed with hardcore digital technology inside, for years of worry free operation.
https://www.youtube.com/watch?v=IB0NrgLDMzY
The Smooth Stage™ is simple to install, simple to use, and flat out WORKS.
Smooth Stage™ technical details
- Â Â Â Instant-On (Powers up with trans-brake)
- Â Â Â Robust Circuitry (Up to 32 amps and 20 volts)
- Â Â Â Proprietary Digital Current Modulation (The key to smooth)
- Â Â Â LED Indication of Power, Bump, and Fault Monitor
- Â Â Â Simple Adjustments (For quick fine-tuning)
- Â Â Â Small and Ultra Light Weight
- Â Â Â Imagined, Designed, and Handcrafted in KS
(0 reviews)$329.99$319.00 Add to cart -
Sale!
Hoses, Fittings, & MoreBaron Racing Billet Raw LS Valve Cover Oil Cap w/ AN Fitting
Comes with a raw finish, available in -10AN, -12AN, and -16AN. Includes O-ring. Sold individually. MADE IN USA!
(0 reviews)$39.00$35.00 Select options -
Sale!
Hoses, Fittings, & MoreBaron Racing Billet Black LS Valve Cover Oil Cap w/AN Fitting
Comes with a black anodized finish, available in -10AN, -12AN, and -16AN. Includes O-ring. Sold individually. MADE IN USA!
(0 reviews)$39.00$35.00 Select options -
All ProductsTI WHEEL STUD KIT 5/8” – 18 X 2.500” (QTY. 10)
CNC machined Grade 5 6Al-4V Titanium.
Includes:
10 x 5/8″ – 18 Ti Wheel Studs
10 x 5/8″ – 18 Ti Nylocks
10 x 5/8″ – 18 Ti Flanged Hex Nuts
10 x Aluminum 0.438″ Wide Spacers
Comes with free ARP ULTRA-TORQUE LUBRICANT
(0 reviews)$320.00 Add to cart -
Drivetrain ComponentsChevy 168 Superflex
– 1-piece flex plate
– 164 ring gear teeth
– lightening pocketsMade to Boninfante’s precise, unrivaled quality and safety standards featuring:
• One-piece design with integral ring gear
• Specially selected aerospace grade alloy steel from USA steel mills
• Proprietary 3-stage heat treating process
• Hard machined to exacting tolerances (.002 TIR)
• Boninfante’s proprietary stress proofing and finishing process
• Finished in a beautiful black oxide
• Tested to 20,000 RPM which exceeds SFI safety standard 29.2(0 reviews)$510.00 Add to cart -
Drivetrain ComponentsHemi 136 Megaflex
– 1-piece flex plate
– 136 ring gear teeth
– lightening pocketsMade to Boninfante’s precise, unrivaled quality and safety standards featuring:
• One-piece design with integral ring gear
• Specially selected aerospace grade alloy steel from USA steel mills
• Proprietary 3-stage heat treating process
• Hard machined to exacting tolerances (.002 TIR)
• Boninfante’s proprietary stress proofing and finishing process
• Finished in a beautiful black oxide
• Tested to 20,000 RPM which exceeds SFI safety standard 29.2(0 reviews)$610.00 Add to cart -
Drivetrain Components
Ford Coyote Superflex
– 1-piece flex plate
– 164 ring gear teeth
– lightening pocketsMade to Boninfante’s precise, unrivaled quality and safety standards featuring:
• One-piece design with integral ring gear
• Specially selected aerospace grade alloy steel from USA steel mills
• Proprietary 3-stage heat treating process
• Hard machined to exacting tolerances (.002 TIR)
• Boninfante’s proprietary stress proofing and finishing process
• Finished in a beautiful black oxide
• Tested to 20,000 RPM which exceeds SFI safety standard 29.2(0 reviews)$510.00 Add to cart -
All ProductsAeromotive A1000 Fuel Pump
This is the pump that started it all for Aeromotive. Durable, reliable, good looking and it supports high horsepower. Perfect for the daily driver that doesn’t run like a daily driver.
Fuel Injected Engines:
up to 1300 HP – naturally aspirated
up to 1000 HP – forced air inductionCarbureted Engines:
up to 1500 HP – naturally aspirated
up to 1200 HP – forced air induction- ORB-10 inlet and outlet ports.
(0 reviews)$410.00 Add to cart -
All ProductsTI FLANGED 12 POINT M12 – 1.5 NUT & 1/2″ SHANK WASHER COMBO (QTY. 10)
CNC machined forged Grade 5 6Al-4V Titanium 12 point nuts and CNC machined 7075 aluminum shank washers. Comes with free ARP ULTRA-TORQUE LUBRICANT
10 x M12 – 1.5 12 point nuts
10 x 1/2″ shank washers
(0 reviews)$159.99 Add to cart -
All Products
TI FLANGED 12 POINT 1/2″ – 20 NUT & 1/2″ SHANK WASHER COMBO (QTY. 10)
CNC machined forged Grade 5 6Al-4V Titanium 12 point nuts and CNC machined 7075 aluminum shank washers. Comes with free ARP ULTRA-TORQUE LUBRICANT
10 x 1/2″ -20 12 point nuts
10 x 1/2″ shank washers
(0 reviews)$159.99 Add to cart -
Sale!
-
SteeringGrant GT Steering Wheel
13″ diameter, 2 provisions for steering wheel buttons, 5 bolt pattern
(0 reviews)$129.00 Add to cart -
All ProductsGreen Push Button Corded Switch
12V operation, 10A, 18 ga wiring
(0 reviews)$59.00 Add to cart -
-
Sale!
All ProductsMPI DRG13 Steering Wheel
Bright orange marker
Special ergonomic foam grip (to increase grip, control and to reduce vibrations)
Multiple predrilled switch holes
Hole pattern: Standard 5 holes
Light weight aluminium structure
Black anodized spokes
Highest quality of Italian suede (Suede applied by hand in Italy)(0 reviews)$349.00$329.00 Add to cart -
-
Sale!
All ProductsATOMIZER 3 700 PPH
PRICES FORÂ INJECTORSÂ ARE EACH.
(0 reviews)$417.38$330.00 Add to cart -
Sale!
EFI & ElectronicsATOMIZER 3 800 PPH
PRICES FORÂ INJECTORSÂ ARE EACH.
(0 reviews)$435.75$330.00 Add to cart -
Sale!
EFI & ElectronicsATOMIZER 3 850 PPH
PRICES FORÂ INJECTORSÂ ARE EACH.
(0 reviews)$446.25$330.00 Add to cart -
EFI & Electronics
ATOMIZER 3 700 PPH
PRICES FORÂ INJECTORSÂ ARE EACH.
(0 reviews)$417.38 Add to cart -
-
-
-
-
